how to draw 3 dimensional objects

Download Article

Download Article

Shapes are some of the commencement things you probably learned to describe. With a little practice, you can make those shapes appear 3-dimensional. In nigh cases, you'll merely need to draw a line that curves on your shape to create perspective. Once y'all have the outline of a 3D shape, imagine where the light source is striking it and shade the contrary side heavily.

1. 1

   Make a circle using a pen or pencil. Describe the circle so information technology'southward as wide as you'd like the sphere to exist. Printing lightly so you tin can easily go back and shade in the sphere. For a little help drawing a circle, trace something round or use a compass.^[1]

2. 

   2

   Draw a curved line beyond a circumvolve to create a 3-dimensional sphere. You lot tin make the line bend up or downwardly in the heart of the circle to suggest the viewer is looking at the sphere from beneath or higher up. Curve the line every bit far upwardly or downwardly every bit you want, keeping in mind that a shallow curve gives you lot a side-view perspective.^[ii]

   • If you'd like to testify fifty-fifty more than 3-dimensional detail, depict a dotted or dashed line that curves across the circumvolve in the opposite direction of your line. The dotted line implies that yous're looking backside the sphere.

   Advertisement

3. 3

   Apply heavy pressure to shade a sliver of the sphere'south side and lesser. Determine where light hits your sphere and begin shading forth the opposite side of the sphere where the shadow would fall. Then, utilise a little less pressure as yous shade in the curved center of the sphere. Use a light affect to shade but a little where the low-cal would striking the sphere.^[3]

   • For case, if calorie-free hits the top correct of the sphere, printing firmly along the bottom left portion of the sphere to brand a shaded crescent.

   Advertisement

1. 

   one

   Depict 2 overlapping squares that are the aforementioned size. Make a unproblematic square that's any size you lot like. Then, place your pencil in the center of the square and sketch another square from this point so you have 2 squares that overlap slightly.^[4]

   • It's of import to make the squares the same size or they won't grade a cube when y'all connect them.

2. 

   2

   Make direct lines that connect the corners of the squares. Draw a straight line from 1 corner of a square to the matching corner of the other square. Repeat this for each corner to create a cube.^[five]

   • Make the straight lines connecting each corner parallel to make the cube realistic.

   Tip: If you don't want all the lines to be visible, erase the 3 connecting lines that are in the center of the square that's closest to you lot.

3. iii

   Shade one side of the cube dark and use lite pressure level to shade the other sides. Since 1 side of the cube will be blocked from a light source, shade it in heavily and so information technology's noticeably nighttime. Then, apply medium or low-cal pressure to shade the tiptop of the box and the other visible side of the cube.^[6]

   • To make the cube even more realistic, draw a square-shaped shadow coming from the dark side of the cube.

   Advertisement

1. 1

   Sketch a V shape using a pen or pencil. If yous can draw a triangle, you can easily make a cone. Depict a V shape or sketch information technology upside downward every bit though you're starting to draw a triangle without its base of operations.^[seven]

   • Make the V shape as big every bit you lot'd like the cone to be.

2. 

   2

   Depict an oval at the base of the V shape. Lightly sketch an oval shape that connects the ii widest points of the V shape. This seals off the shape to create a three-dimensional cone.^[eight]

   Tip: If you're making an upside-down V shape, you could shade in a shadow from the bottom of 1 side.

3. 3

   Darken 1 side of the cone and gradually shade to the opposite side. Rub the tip of your pencil back and forth along 1 side of the cone until it's heavily shaded. Apply a little less pressure as you shade towards the middle of the cone and use a lite touch the opposite side.^[nine]

   • Add a little more than shading along the bottom of the cone near the darker side of the cone.

   Advertisement

1. 1

   Make an equilateral triangle. Have a pencil and depict a triangle that has equal sides. An equilateral triangle too has 3 equal angles since the sides are the same length. If it helps, trace an equilateral triangle or use a ruler so you get exact measurements.^[x]

2. 

   2

   Sketch another triangle coming from 1 side of your equilateral triangle. Place your pencil at the top of the equilateral triangle and make a straight line that comes down towards the side of the first triangle, only don't let it attain equally far as the lesser of the get-go pyramid. Then, draw a direct line connecting the bottom of this line with the corner of the first pyramid.^[11]

   • Make the peak angle of the side pyramid between xx and 40 degrees so your pyramid doesn't look unbalanced.

   Tip: If yous'd like to show the view inside the pyramid, draw a square using a dashed line along the base of the triangle. Brand another dashed line from the back corner of the square to the top of the pyramid.

3. three

   Shade in 1 side of the pyramid and get out the other side lighter. Decide where the light is hit your pyramid and shade the contrary side until information technology's dark. For example, if the light is hitting the side of the pyramid, shade in the front and so it looks like it's in shadow.^[12]

   • If you'd like to include a shadow, shade in a triangular shape coming from the bottom of the pyramid.

   Advert

1. one

   Draw a triangle to make the front end of the prism. You tin brand the triangle whatsoever size you lot like. Consider making information technology big until y'all become comfortable with drawing prisms. Then, you can endeavor making tiny triangular prisms.^[xiii]

   • You can make any type of triangle you like. Make an equilateral, isosceles, or a right triangle, for example.

2. 

   ii

   Create some other triangle that's the same size as the first triangle. Place this identical triangle where you want the prism to end. This triangle makes the back face of the prism.^[xiv]

   • Ensure that the triangles aren't touching or it will be difficult to draw the remaining lines for the prism.

3. 

   3

   Draw straight lines to connect each of the front triangle points with the dorsum points. Place your pencil on the pinnacle of the front triangle and describe a straight line to the height of the back triangle. Repeat this for the other ii points of each triangle to create a prism.^[15]

   Tip: If you'd like the triangular prism to appear opaque, erase the middle lines of the prism.

4. iv

   Shade in i side of the triangular prism. Think most how the calorie-free is hitting the prism and shade in the other side of the prism until information technology's dark. For example, if light is hit the side of the prism, make the front face dark.^[16]

   • If you'd like the light to hit the front of the prism, heavily shade in the side.

   Advertisement

Add New Question

• Question

  How can I draw a rectangular prism?

  

  You tin can make a rectangular prism by turning the squares in the cube instructions into rectangles.

• Question

  How do I draw a pyramid?

  

  Look at the finished triangular prism. Call back, a triangular prism is a pyramid, don't permit the names fool you!

• Question

  How do I draw a 3D pentagon?

  

  If y'all desire information technology to exist like a rectangular prism, merely a pentagon, I recommend drawing the 2 pentagons and then connecting the corners. The second pentagon volition be slightly above and to the left of the first, simply they will still overlap.

Ask a Question

200 characters left

Include your electronic mail address to go a bulletin when this question is answered.

Submit

Advert

• You can make a rectangular prism by connecting ii squares with direct parallel lines.

• Utilize a ruler to make perfectly straight lines for your 3-dimensional shapes.

Thank you for submitting a tip for review!

Ad

Things You'll Need

• Sharp pencil
• Paper or cartoon pad
• Colored pencils, optional

Most This Article

Commodity Summary 10

To depict a 3D shape, beginning past drawing a square in the center of a piece of paper. And then, draw some other square higher up information technology and to the right. The lesser left of the second square should intersect the top right of the showtime foursquare, creating a smaller square betwixt the two. Next, connect the corners of the first square to the corners of the 2nd foursquare with straight lines. Finally, erase the within lines and so that you lot're left with a solid cube. For tips on how to depict other 3D shapes, similar cylinders or pyramids, keep reading.

Did this summary assist you?

Thanks to all authors for creating a page that has been read 166,063 times.

Did this article help you?

Source: https://www.wikihow.com/Draw-3D-Shapes

Posted by: ramosbuttle.blogspot.com

Share this post